Filter
Top Products
38
GB
E:\SEM_Janet\Year2006\Revision_Data\Revision4_SF1000\JC06xxx_2661769141SF1000_GB\2
661769141\GB05AMP_HT-SF1000-CEL.fm
masterpage: Left
model name1[HT-SF1000]
model name2[HT-SS1000]
2-661-769-14
(1)
x SL DIST. (Surround left speaker
distance)
Lets you set the distance from your listening
position to the surround left speaker. Surround
left speaker distance should be set from a
distance equal to the front speaker distance (A
on page 37) to a distance 4.5 meters closer to
your listening position (C on page 37).
x SR DIST. (Surround right
speaker distance)
Lets you set the distance from your listening
position to the surround right speaker.
Surround right speaker distance should be set
from a distance equal to the front speaker
distance (A on page 37) to a distance 4.5
meters closer to your listening position (D on
page 37).
Tip
The receiver lets you to input the speaker position in
terms of distance. However, it is not possible to set
the center speaker further than the front speakers.
Also, the center speaker cannot be set more than
1.5 meter closer from the front speakers.
Likewise, the surround speakers can not be set
further away from the listening position than the
front speakers. And they can be no more than
4.5 meter closer. This is because incorrect speaker
placement is not conducive to the enjoyment of
surround sound.
Please note that, setting the speaker distance closer
than the actual location of the speakers will cause a
delay in the output of the sound from that speaker. In
other words, the speaker will sound like it is further
away.
For example, setting the center speaker distance
1-2 meter closer than the actual speaker position will
create a fairly realistic sensation of being “inside”
the screen. If you cannot obtain a satisfactory
surround effect because the surround speakers are
too close, setting the surround speaker distance
closer (shorter) than the actual distance will create a
larger sound stage.
Adjusting these parameter while listening to the
sound often results in much better surround sound.
Give it a try!
x SUR PL.
(Surround speaker placement)
Lets you specify the height of your surround
speakers for proper implementation of the
surround effects in the Cinema Studio EX
modes (page 42).
• PL. LOW
Select if the height of your surround
speakers corresponds to section A.
• PL. HIGH
Select if the height of your surround
speakers corresponds to section B.
GB01COV_HT-SF1000-CEL.book Page 38 Sunday, February 12, 2006 10:44 AM