Filter
Top Products
19
GB
E:\SEM_Janet\Year2006\Revision_Data\Revision4_SF1000\JC06xxx_2661769141SF1000_GB\2
661769141\GB03CON_HT-SF1000-CEL.fm
masterpage: Right
model name1[HT-SF1000]
model name2[HT-SS1000]
2-661-769-14
(1)
Getting Started
The following illustration shows how to
connect video components such as DVD
player, DVD recorder, satellite tuner or VCR.
If you connect a DVD recorder
Be sure to change the factory setting of the
DVD input button on the remote so that you
can use the button to control your DVD
recorder. For details, see “Changing button
assignments” (page 50).
Notes
•You cannot do recording on the DVD recorder or
VCR via this receiver. For details, refer to the
operating instructions supplied with the DVD
recorder or VCR.
• To input multi channel digital audio from the DVD
player, set the digital audio output setting on the
DVD player. Refer to the operating instructions
supplied with the DVD player.
•When connecting optical digital cords, insert the
plugs straight in until they click into place.
•Do not bend or tie optical digital cords.
Tip
All the digital audio jacks are compatible with
32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling
frequencies.
Connecting video components
SA-CD/CD
AUDIO IN AUDIO IN
VIDEO 1
HDMI
R
L
R
AM
U
OPT IN
SA-CD/CD
ANTENNA
DIGITAL
DVD IN VIDEO 2 IN MONITOR OUT
FRONT R
– +
FRONT L
– + – + – +
SUR R SUR L
OPT IN
VIDEO 2
VIDEO 2
AUDIO IN
L
DVD
COAX IN
Satellite tuner
BA
AOptical digital cord (not supplied)
BAudio cord (not supplied)
CCoaxial digital cord (orange) (supplied)
DVD player/
DVD recorder
VCR
CB
GB01COV_HT-SF1000-CEL.book Page 19 Sunday, February 12, 2006 10:44 AM