Filter
Top Products
57
GB
Additional Information
Specifications
Amplifier section
HT-SF1100 only
Power Output
1)
Stereo mode (rated) 70 W + 70 W
(4 ohms at 1 kHz,
THD 1%)
Surround mode (reference)
RMS Output
FRONT
2)
: 143 W/ch
(With SS-MSP2000)
CENTER
2)
: 143 W
(With SS-CNP2000)
SUR
2)
: 143 W/ch
(With SS-SRP2000)
SUBWOOFER
2)
: 285 W
(With SS-WP2000)
HT-SS1100 only
Power Output
1)
Stereo mode (rated) 70 W + 70 W
(4 ohms at 1 kHz,
THD 1%)
Surround mode (reference)
RMS Output
FRONT
2)
: 143 W/ch
(With SS-MSP1100)
CENTER
2)
: 143 W
(With SS-CNP1100)
SUR
2)
: 143 W/ch
(With SS-SRP1100)
SUBWOOFER
2)
: 285 W
(With SS-WP1100)
1)
Measured under the following conditions:
2)
Reference power output for front, center, surround
speakers and subwoofer. Depending on the sound
field settings and the source, there may be no
sound output.
Inputs
Analog Sensitivity: 1 V/50 kohms
Digital
(Coaxial) Impedance: 75 ohms
Tone
Gain levels ±6 dB, 1 dB step
Reproduction frequency range:
28 – 20,000 Hz
FM tuner section
Tuning range 87.5 - 108.0 MHz
Antenna FM wire antenna
Antenna terminals 75 ohms, unbalanced
Intermediate frequency
10.7 MHz
AM tuner section
Tuning range
Models of area code CEL, CEK
With 9-kHz tuning scale:
531 – 1,602 kHz
Antenna Loop antenna
Intermediate frequency
450 kHz
General
Power requirements
Power output (DIGITAL MEDIA PORT)
DC OUT: 5 V, 700 mA
Power consumption
Power consumption (during standby mode)
0.3 W
Dimensions (w/h/d) (Approx.)
430 × 66.5 × 335 mm
including projecting parts
and controls
Mass (Approx.) 3.6 kg
Area code Power requirements
CEL, CEK 230 V AC, 50 Hz
Area code Power requirements
CEL, CEK 230 V AC, 50/60 Hz
Area code Power consumption
CEL, CEK 110 W
continued