Filter
Top Products
21
GB
Getting Started
5: Preparing the receiver
and the remote
Connect the AC power cord to a wall outlet.
Before using the receiver for the first time,
initialize the receiver by performing the
following procedure. This procedure can also
be used to return settings you have made to
their factory defaults.
Be sure to use the buttons on the receiver for
this operation.
1 Press ?/1 to turn off the
receiver.
2 Hold down ?/1 for 5 seconds.
“INITIAL” appears on the display.
The following items are reset to their
factory settings.
• All settings in the LEVEL, TONE,
SUR, TUNER, AUDIO and SYSTEM
menus.
• The sound field memorized for each
input and preset station.
• All sound field parameters.
• All preset stations.
• MASTER VOLUME is set to “VOL
MIN”.
• Input is set to “DVD”.
Connecting the AC power cord
AC power cord
To the wall outlet
Performing initial setup
operations
DMPORT VIDEO 1VIDEO 2/BD DVD SAT TV SA-CD/CD TUNER
MASTER VOLUME
AUTO CAL MIC
INPUT SELECTOR
PRESET TUNING
SOUND FIELD MUTING
?/1
1,2