Filter
Top Products
3
4
5
6
Press ,I,/4,to select [CUSTOM], then
press @.
The Setup Display appears.
Press 'I'/4, repeatedly to select
[SPEAKER SETUP], then press @ or
-).
Press t'/4, repeatedly to select [TEST
TONE], then press @ or -).
Press ,Phi,repeatedly to select [ON],
then press @.
You will hear the lesl tone from each
speaker in sequence.
7 From your listening position,adjust the
value of [LEVEL (FRONT)] or [LEVEL
(SURROUND)] using <..I,1,14,1->.
The test lone is emitted from only the
speaker which you are adjusting.
8 Press @ when you have finished
making adjustments.
g Press t'/4, repeatedly to select [TEST
TONE], then press @.
10Press ,t./4, repeatedly to select [OFF],
then press @.
• The lest lone signals arc not oulput from the HDMI
OUT jack.
You can return the systenl l)arameters, such as
preset slations, to Ihe default settings.
I/<b _ •
1
2
Press I/_ to turn on the system.
Press II, _, and I/_ on the unit at the
same time.
"COLD RESET" appears in the front p:mel
display and the default settings are returned.
g4us