Filter
Top Products
5
Answering calls:
1. A beep in your headset and the phone’s usual ringing tone will indi-
cate an incoming call.
2. Press shortly on either the headset or the base’s Multifunction
button .
3. The GN 1000 RHL will lift the telephone’s handset and you are now
connected to your caller.
The Headset Indicator and the On-line Indicator will flash frequently for
the duration of the call.
Ending calls:
1. Press shortly on either the headset or the base’s Multifunction button . The GN 1000 RHL will
lower the telephone’s handset and your call is now terminated.
Headset <––> handset switching (while on a call)
To switch from using the headset to using the handset during a call:
1. Pick up the telephone’s handset from the GN 1000 RHL’s lifter arm.
2. Press shortly on the headset or the base’s Multifunction button and the call is transferred and
can be continued via the handset.
3. To end the call, hang up the telephone handset.
To switch from using the handset to using the headset during a call:
1. Press shortly on either the headset or the base’s Multifunction button . The connection will be
established shortly.
2. When the GN 1000 RHL is activated, place the handset on the lifter arm.
3. To end the call, press shortly on either the headset or the base’s Multifunction button.
You may continue wearing the headset, or place it in the base for recharging.
3. Use with Mobile phones
3.1 Setting up and using the GN 6210 with your mobile phone
Your GN 6210 is compatible for use with most Bluetooth
®
mobile phones. Before setting up (pairing) your
GN 6120 to your specific mobile phone, you will need to:
• Determine if you should set up according to the headset or the hands-free profile.
• Prepare your mobile phone for Bluetooth device discovery.
Setting up according to headset or hands-free profile
Mobile phones work with your GN 6210 using either their headset or hands-free profiles. Before setting up
or using your mobile phone with your GN 6210, you must determine which one of your mobile phone’s
profiles works best with your headset.
Instructions for setting up your headset with the two profiles vary slightly. These instructions can be found
from Section 5 of the GN 6210 Quick Set Up guide.
The following mobile phones models use the he
adset profile to work with the GN 6210:
• Sony Ericsson models
• Nokia 6310, 6310i, 7600 and 5650
• Siemens S55
The following mobile phones models use the hands-f
ree profile to work with the GN 6210:
• Newer Nokia models
GN6210_UG_4.10 04/10/04 14:55 Side 5