Filter
Top Products
41
Other Functions
Adjusting the sound
characteristics
You can adjust the bass, treble, balance, fader,
and subwoofer volume.
1
Press (SOURCE) to select a source
(radio, CD, MD, MS, or AUX).
2
Press (SOUND).
3
Press < or , repeatedly to select the
item you want to adjust.
Each time you press < or ,, the item
changes as follows:
DSO
y
EQ7
y
Bass
y
Treble
y
Balance (left-right)
y Fader (front-rear)
y SubWoofer (subwoofer volume)
4
Press (ENTER).
5
Adjust the selected item by pressing
< or ,.
6
Press (ENTER).
Quickly attenuating the
sound
Press (ATT).
“ATT” appears in the display for a while.
To restore the previous volume level, press
(ATT) again.
Tip
When the interface cable of a car telephone is
connected to the ATT lead, the unit decreases the
volume automatically when a telephone call comes in
(Telephone ATT function).
Changing the sound and
display settings
— Menu
The following items can be set:
Setup
• Clock (page 18)
• CT (Clock Time) (page 31)
• Beep — to turn the beeps on or off.
• AUX Skip*
1
(page 46) — to turn the AUX
source display on or off.
• MS Auto (page 20)
Display
• Dimmer — to change the brightness of the
display.
– Select “AUTO” to dim the display only when
you turn the lights on.
– Select “ON” to dim the display.
– Select “OFF” to deactivate the Dimmer.
• Contrast — to adjust the contrast if the
indications on the display are not recognizable
because of the unit’s installation position.
• AutoScroll*
2
– Select “ON” to scroll all automatically
displayed names.
– When “AutoScroll” is set to “OFF” and the
disc/track name is changed, the disc/track
name does not scroll.
PlayMode
• Local (Local seek mode) (page 25)
– Select “ON” to only tune into stations with
stronger signals.
• Mono (Monaural mode) (page 25)
– Select “ON” to hear FM stereo broadcast in
monaural. Select “OFF” to return to normal
mode.
• Regional (page 28)
continue to next page t