Filter
Top Products
37
Setting a clip motion
— ClipMotion (Standard mode)
You can store your favourite GIF image or GIF
animation file for each source and display them
in the source display area in the Standard mode.
The image data you set will be stored in this unit.
1
Insert a “Memory Stick” (page 10).
2
Select a source (radio, CD, MD, MS, or
AUX) that you want to set a clip
motion.
3
Press (GRAPHIC).
4
Press < or , repeatedly to select
“ClipMotion.”
Each time you press < or ,, the item
changes as follows:
Wall Paper y Panorama y Jacket
Pic y ClipMotion y Slide Show y
Picture Del y Char Setup
5
Press (ENTER).
6
Press M or m to select “Memory Stick.”
If you want to change the display type of a
previously stored image, select
“FlashMemory.”
7
Press (ENTER).
If you select “FlashMemory” in step 6, skip to
step 8.
8
Press M or m repeatedly to select a
location or type of image that you want
to set.
Picture Select: If an image you want to set
is in the first layer of a “Memory Stick,”
select this.
Cyber-shot: If you want to set a picture
taken by an optional Sony digital still camera
Cyber-shot, select this.
(Folder name): When a folder is in a
“Memory Stick,” the folder name is
displayed.
9
Press (ENTER).
Select the folder name in step 8. If there are
images in folders of a lower layer, repeat step
8 and 9 to select the folder which contains
your desired image.
An image can be set in up to the 5th layer
folder in a “Memory Stick.”
10
Press < or , repeatedly to select the
image you want to set.
11
Press (ENTER).
12
Press M or m to select “Setup.”
13
Press (ENTER).
14
Press M or m to select the display
type.
You can select one of the following 2 display
types.
Normal: displays the image you select in
step 10.
Just: adjusts and displays the selected image
according to the display size.
15
Press (ENTER).
Example: Just
16
Press M or m to select “Save.”
17
Press (ENTER).
continue to next page t