Filter
Top Products
8
Getting Started
LINE-1 (RGB) - TV
VIDEO OUT S VIDEO OUT
DIGITAL OUT
COMPONENT VIDEO OUT
COAXIAL OPTICAL
AUDIO OUT5.1CH OUTPUT
WOOFER
L
R
RL
PCM/DTS/MPEG/
DOLBY DIGITAL
LINE-2
FRONT REAR CENTER
YC
B
/B-Y C
R
/R-Y
CD/DVD player
: Signal flow
TV Hookups
This connection is for listening to the sound through TV
speakers (L: left, R: right). Refer to the instructions
supplied with the component to be connected. You cannot
connect this player to a TV without a SCART (EURO AV)
connector or a video input connector.
zYou can enjoy surround sound using your TV’s built-in
speakers
You can use 3D sound imaging to create virtual rear speakers
from the sound of built-in TV speakers without using actual rear
speakers (VES TV: Virtual Enhanced Surround TV). For details,
see page 38.
Required cords
SCART (EURO AV) connecting cord (not supplied) (2)
Be sure to make connections firmly to avoid hum and noise.
Refer to the instructions supplied with the TV to be connected.
Notes
• When you set “LINE” to “S VIDEO” or “RGB” under
“CUSTOM SETUP” in the setup display, use a SCART (EURO
AV) connecting cord that conforms to each signal.
• When you connect using the SCART (EURO AV) connecting
cord, confirm that the TV corresponds to S VIDEO or RGB.
Refer to the instructions supplied with the TV to be connected.
To T LINE-1
(RGB)-TV
To an AC outlet
TV
To SCART
(EURO AV)
output
To i LINE-2
To SCART
(EURO AV)
input
VCR