Filter
Top Products
7
US
DR-BT10CX_U2 [US,ES] 2-698-598-41(1)
1 Connect the supplied
AC power adaptor with
the battery charging
stand.
2 Connect the supplied
AC power adaptor to an
AC outlet.
Charging the unit
The unit contains a rechargeable Lithium-Ion battery, which should be
charged before using for the first time.
3 Put the unit on the
battery charging stand.
Note
If the holding clip is turned, the
unit cannot be set on the battery
charging stand and charging does
not start. Turn the holding clip
back to the original position before
charging.
Rest the unit on the battery
charging stand so that the unit’s
contact point meets the contact pin
on the battery charging stand, and
make sure that the indicator (red)
lights up.
Charging is completed in about 3
hours* and the indicator (red) goes
off automatically.
* Time required for empty battery to
recharge.
Tip
When charging the battery, the unit is
turned off automatically.
Continued
Battery charging
stand (supplied)
(Rear)
AC power
adaptor
(supplied)
To an AC
outlet
Battery charging
stand (supplied)
Wireless Stereo
Headset
Contact pin