Filter
Top Products
10
US
DR-BT10CX_U2 [US,ES] 2-698-598-41(1)
3 Perform pairing
procedure on the
connecting device to
detect this unit.
The list of detected devices
appears on the display of the
connecting device. This unit is
displayed as “DR-BT10CX.”
Note
If “DR-BT10CX” is not displayed,
repeat from step 1.
4 Select “DR-BT10CX” on
the display of the
connecting device.
5 If Passcode* input is
required on the display
of a connecting device,
input “0000.”
Pairing is complete when the
indicator (blue) flashes slowly.
The message standing for
“Pairing complete” appears on
the display of some
BLUETOOTH devices.
* Passcode may be called
“Passkey,” “PIN code,” “PIN
number,” or “Password.”
Note
Passcode of this unit is fixed at
“0000.” This unit cannot be paired
with a BLUETOOTH device
whose Passcode is not “0000.”
6 Start the BLUETOOTH
connection from the
BLUETOOTH device.
This unit memorizes the
device as the latest connected
device. Some BLUETOOTH
devices may connect with the
unit automatically when
pairing is complete.
When pairing with a
BLUETOOTH device that
cannot display a list of
detected devices or that
has no display
You may pair the device by setting
both this unit and the connecting
device to pairing mode. For details,
refer to the operating instructions
supplied with the connecting device.
Tips
• To pair with other BLUETOOTH
devices, repeat steps 1 to 5 for each
device.
• To delete all pairing information, see
“Initializing the unit” (page 24).