Sony DAV-IS10 Home Theater System User Manual


 
masterpage:Left
specdef v20060111
filename[G:\FM\Sony\0508\3212589121\3212589121DAVIS10\gb08usi.fm]
model name [DAV-IS10]
[3-212-589-12(1)]
46
US
Using the HDMI CONTROL Function for ‘BRAVIA’ Theatre Sync
You can enjoy digital sound and images of STB or a digital satellite receiver. Sound is output from the
speakers of this system. Images of STB or a digital satellite receiver are output from the TV by the
HDMI connection (HDMI 1 shown below). Follow the connections and settings.
Connecting the system
Connect the STB to the HDMI input jack of the TV with an HDMI cable (not supplied) (make sure to
connect from the smallest number).
By connecting as the following illustration, you can enjoy Multi Channel Broadcasted Audio from the
speakers of this system.
Note
•To enjoy STB sound, the TV must be equipped with 2 HDMI input jacks.
• The names of HDMI inputs in the following illustration are examples.
Setting [STB SYNCHRO]
1 Press "/1.
2 Press DISPLAY when the system is in stop mode.
3 Press X/x to select [SETUP], then press .
4 Press X/x to select [CUSTOM], then press .
5 Press X/x to select [CUSTOM SETUP], then press .
Note
•In order to set the [STB SYNCHRO] function, first set [HDMI CONTROL] to [ON] (page 41).
Enjoying STB (Set Top Box) Digital Sound or Digital
Satellite Receiver Sound from the System
(STB SYNCHRO)
DMPORT
: Video signal flow
To HDMI 2 (HDMI cable)
TV
: Audio signal flow
To HDMI 1 (HDMI cable)
Rear of the control unit
STB
C
Digital coaxial cord or
digital optical cord