Filter
Top Products
82
US
Center (SS-CT71)
Speaker system Bass reflex, magnetically
shielded
Speaker unit 65 mm (2
5
/8 inches) dia,
cone type
Rated impedance 3.0 ohms
Dimensions (approx.) 261 × 91 × 80 mm (10
3
/8 ×
3
5
/8 × 3
1
/4 inches) (w/h/d)
Mass (approx.) 0.7 kg (1 lb 9 oz)
Surround (SS-TS71)
Speaker system Bass reflex, magnetically
shielded
Speaker unit 65 mm (2
5
/8 inches) dia,
cone type
Rated impedance 3.0 ohms
Dimensions (approx.) 93 × 162 × 75 mm (3
3
/4 ×
6
1
/2 × 3 inches) (w/h/d)
Mass (approx.) 0.6 kg (1 lb 6 oz)
Subwoofer (SS-WS71)
Speaker system Bass reflex
Speaker unit 160 mm (6
3
/8 inches) dia,
cone type
Rated impedance 3.0 ohms
Dimensions (approx.) 197 × 322 × 345 mm (7
7
/8
× 12
3
/4 × 13
5
/8 inches)
(w/h/d)
Mass (approx.) 5.6 kg (12 lb 6 oz)
General
Power requirements 120 V AC, 60 Hz
Power consumption On: 150 W
Standby: 0.3 W (at the
Power Saving mode)
Dimensions (approx.) 430 × 63 × 380 mm (17 ×
2
1
/2 × 15 inches) (w/h/d)
incl. projecting parts
Mass (approx.) 4.1 kg (9 lb 1 oz)
Design and specifications are subject to change
without notice.
Unpacking
• Front speakers (2)
• Center speaker (1)
• Surround speakers (2)
• Subwoofer (1)
• AM loop antenna (aerial) (1)
• FM wire antenna (aerial) (1)
• Speaker cords (6, red/white/green/gray/blue/purple)
•Video Cord (1)
• Remote Commander (remote) (1)
• R6 (size AA) batteries (2)
• Calibration mic (1)
• Foot pads (1 set)
•Operating Instructions
• HDMI CONTROL Guide
•Speaker and TV connections (card)
•Standby power consumption 0.3 W (or
less).
•Halogenated flame retardants are not
used in the printed wiring boards.
•Over 85 % power efficiency of
amplifier block is achieved with the
full digital amplifier, S-master.