Filter
Top Products
56
US
Operating the THEATRE SYNC
function
Point the remote to the direction of TV and this
unit, then press THEATRE SYNC once.
If this function does not work, change the
transmit time. The transmit time varies
depending on the TV.
To change the transmit time
Press and hold TV CH + while entering the
code for transmit time (see the table) using
the number buttons.
The transmit time from the remote is selected.
Note
• This function is only for Sony TVs. (This function
may not work on some Sony TVs.)
• If distance between TV and this unit is too far, this
function may not work. Install the unit near the TV.
• Keep the remote pointed in the direction of the TV
and this unit while entering the code.
Reinforcing bass frequencies
You can reinforce bass frequencies.
Press DYNAMIC BASS.
Bass frequencies are effectively reinforced.
To turn off the sound effect
Press DYNAMIC BASS again.
By pressing Number Transmit time
TV CH + 1 0.5 (Default)
21
31.5
42
53
64
75
86
Using the Sound Effect