Filter
Top Products
Getting Started
15
GB
Connect the supplied speaker system using the supplied speaker cords by matching the colors of the
jacks to those of the cords. Do not connect any speakers other than those supplied with this system.
To obtain the best possible surround sound, specify the speaker parameters (distance, level, etc.) on
page 81.
Required cords
Speaker cords
The connector and the color tube of the speaker cords are the same color as the label of the jacks to be
connected.
Attaching the speaker stand to the speaker
Before connecting the speakers, attach the speaker stand to the speaker.
• Spread a cloth on the floor to avoid damaging the floor.
• You can use the speaker without the speaker stand by installing it on the wall (page 21).
1 Insert the post into the base.
The long post is for floor use, the short post is for tabletop use.
Step 1: Speaker System Hookup
Note
Tip
(+)
(–)
Color tube
Black
Gray
(–)
(+)
Post (long)
Post (short)
Screw holes
Base
or
continued