Filter
Top Products
Getting Started
33
GB
xTEST TONE
The speakers will emit a test tone to adjust “BALANCE” and “LEVEL.”
OFF
ON
The test tone is not emitted from the speakers.
The test tone is emitted from each speaker in sequence. When “BALANCE” is selected,
the test tone is emitted from both left and right speakers simultaneously. When “LEVEL”
is selected, the test tone is emitted from only the speaker that you are adjusting.
Adjusting the speaker volume and level
1 After you stop playback, select “SPEAKER SETUP” after pressing DVD SETUP in the Setup
Display.
2 Select “TEST TONE” and set to “ON.”
You will hear the test tone from each speaker in sequence.
3 From your listening position, select “BALANCE” or “LEVEL” and adjust the value of
“BALANCE” and “LEVEL” using X/x.
The test tone is emitted from both left and right speakers simultaneously.
4 Select “TEST TONE” and set to “OFF” to turn off the test tone.
Note
When you adjust the speaker settings, the sound cuts off for a moment.