29
GB
Using Other Functions
Changing the settings of
the home network
function of the receiver
You can set up the receiver to be used as a
server.
1 Press AMP.
The receiver can be operated using the
remote.
2 Press MENU.
The menu is displayed on the TV screen.
3 Press V/v repeatedly to select
“ Settings,” then press or
b.
4 Press V/v repeatedly to select
“Network,” then press or b.
5 Press V/v repeatedly to select
“Server Function Setup,” then
press .
6 Press V/v repeatedly to select
“ON” or “OFF,” then press .
A confirmation screen appears on the TV
screen
7 Press to select “Finish.”
Turning the server function on/
off
AMP
V/v/b,
MENU