50
US
D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\U
VERSION\US\4129743111\US07OTH_STR-DA1500ES-U.fm
masterpage: Left
STR-DA1500ES
4-129-743-11(1)
The following operations are described for
connecting an IR repeater and operating the
receiver in zone 2. When an IR repeater is not
connected, use this receiver in the main zone.
1 Turn on the main receiver (this
receiver).
2 Turn on the receiver in zone 2.
3 Press ZONE ?/1.
The zone function is activated.
4 Press ZONE INPUT repeatedly
to select the source you want.
5 Adjust to a suitable volume.
Adjust the volume using the receiver in
zone 2.
To finish the zone 2 operation
Press ZONE ?/1.
Tip
Even when this receiver is in standby mode (press
?/1 on the remote to turned off this receiver), the
receiver in zone 2 remains turned on. To turn off all
receivers, press ?/1 and AV ?/1 on the RM-
AAU056 remote at the same time (SYSTEM
STANDBY).
Operating the receiver from
zone 2
MASTER
VOL +/–
ZONE ?/1
ZONE
INPUT