Filter
Top Products
18
GB
You can wake up to music at a preset time. Make
sure you have set the clock (see “Setting the
clock” on page 8).
Use buttons on the remote for the operation.
1 Prepare the sound source you want to
play.
• CD: Load a disc. To start from a specific
track, make a program (see “Creating
your own program” on page 11).
• TAPE: Load a tape (see “Playing a tape”
on page 15).
• TUNER: Tune in a radio station (see
“Listening to the radio” on page 13).
2 Adjust the volume.
3 Press CLOCK/TIMER SET.
4 Press ./> repeatedly until
“PLAY” appears, then press ENTER.
“ON TIME” appears and the hour
indication flashes.
5 Set the time to start playing.
Press ./> repeatedly to set the hour,
then press ENTER.
The minute indication flashes.
Press
./> repeatedly to set the
minute, then press ENTER.
6 Set the time to stop playing following
the same procedure as step 5.
7 Press ./> repeatedly until the
desired sound source appears.
Each time you press the button, the display
changes cyclically as follows:
8 Press ENTER.
The start time, the stop time and the sound
source, then the original display returns.
9 Press ?/1 to turn off the system.
Other operations
Notes
• If you use Play Timer and Sleep Timer at the same
time, Sleep Timer has priority.
• Do not operate the system from the time the system
turns on until the play starts (about 15 seconds before
the preset time).
• If the system is on about 15 seconds before the preset
time, Play Timer will not be activated.
• You cannot use the optional component connected to
the MD jacks as sound sources for Play Timer.
• You cannot activate Play Timer and Rec Timer at the
same time.
Waking up to music
— Play Timer
t
TUNER
y
CD
T
t
TAPE
T
To Do this
Cancel the timer/
activate the timer/
check the setting
1 Press CLOCK/TIMER
SELECT and “SELECT”
appears.
2 Press ./> repeatedly
until “PLAY”, “REC” or
“(TIMER) OFF” appears,
then press ENTER.
Change the setting Start over from step 1.