Filter
Top Products
Getting Started
9
GB
Perform the following procedures 1 to 3 to hook up your system using the supplied cords and
accessories.
1 Connect the speakers.
Connect the right and left speaker cords to
the SPEAKER terminals as shown below.
2 Connect the FM and AM antennas.
Set up the AM loop antenna, then connect
it.
Note
To prevent noise pickup, keep the antennas away from
the speaker cords.
3 Connect the mains lead to mains.
If the plug does not fit the wall socket,
detach the supplied plug adaptor (only for
models equipped with an adaptor). To turn
on the system, press ?/1.
Getting Started
Hooking up the system
3
2
1
AM loop antenna
Right speaker Left speaker
FM lead antenna
Extend the FM lead
antenna horizontally
AM loop antenna
continued
**&GI