Filter
Top Products
Tape – Play/Tape – Recording
19
GB
You can record a whole CD on a tape.
You can use TYPE I (normal) tape. The
recording level is adjusted automatically.
Use buttons on the unit for the operation.
1 Load a recordable tape.
2 Press FUNCTION repeatedly to switch
the function to TAPE.
3 Press DIRECTION repeatedly to select
“g” to record on one side. Select
“h” or “j” to record on both sides.
4 Press TAPE nN repeatedly to select
recording side, then press TAPE x.
If you select both sides recording or front
side recording, press TAPE nN
repeatedly to light up the N indicator, then
press TAPE x.
If you record on the reverse side, press
TAPE nN repeatedly to light up the n
indicator, then press TAPE x.
5 Press FUNCTION repeatedly to switch
the function to CD and load a disc you
want to record.
When you want to record a group from an
ATRAC CD or MP3 CD, be sure to press
PLAY MODE repeatedly to select , then
press + or – repeatedly to select the
desired group before proceeding.
6 Press CD SYNCHRO.
“SYNC”, “REC” and “N” (or “n”)
appear. The tape deck stands by for
recording and the CD player pauses for
playback.
7 Press TAPE X.
Recording starts.
To stop recording
Press TAPE x (or CD x).
Tip
If you stop the recording by pressing CD x, the tape
stops after making about a 4 seconds blank
(unrecorded) space before stopping.
To record a disc by specifying
track order
You can record only your favorite CD tracks
using Program Play. Between steps 5 and 6,
perform steps 2 to 5 of “Creating your own
program” (page 13).
Tip
If you select both sides recording and the tape reaches
the end of the front side part-way through a track, the
entire track is recorded again from the beginning of the
reverse side.
Tape – Recording
Recording your favorite
CD tracks on a tape
— CD-TAPE Synchro Recording
**&GI