Filter
Top Products
16
GB
You can record a whole CD on a tape.
You can use TYPE I (normal).
Use buttons on the unit for the operation.
1 Load a recordable tape.
2 Load a CD you want to record.
When you want to record an album from an
MP3 disc, be sure to press PLAY MODE to
select ALBM, then use ALBUM +/– to
select the desired album before proceeding.
3 Press CD SYNCHRO on the unit.
“SYNC”, “REC” and “N” (or “n”)
appear.
The tape deck stands by for recording and
the CD player pauses for playback.
4 Press DIRECTION repeatedly to select
“g” to record on one side or “h” (or
“j”) to record on both sides.
5 Press TAPE/nN repeatedly to select
the recording side.
If you select both sides recording or front
side recording, press TAPE/nN until
“N” appears. If you record on the reverse
side, press TAPE/nN again until “n”
appears.
6 Press z REC PAUSE/START.
Recording starts.
When the recording is completed, the CD
player and the tape deck stop automatically.
To stop recording
Press x.
To record a disc by specifying
track order
You can record only your favorite CD tracks
using Program Play. Between steps 2 and 3,
perform steps 1 to 5 of “Creating your own
program” (page 11).
Tip
If you select both sides recording and the tape reaches
the end of the front side part-way through a track, the
entire track is recorded again from the beginning of the
reverse side.
Tape – Recording
Recording your favorite
CD tracks on a tape
— CD-TAPE Synchro Recording