Filter
Top Products
22
Setting the equalizer (EQ7)
You can select an equalizer curve for 7 music
types (XPLOD, VOCAL, CLUB, JAZZ, NEW
AGE, ROCK, CUSTOM and OFF (equalizer
OFF)).
You can store a different equalizer setting for
each source.
Selecting the equalizer curve
1 Press (SOURCE) to select a source
(Radio, CD, MD or AUX).
2 Press (EQ7) repeatedly to select the
desired equalizer curve.
Each time you press (EQ7), the item
changes.
To cancel the equalizing effect, select “OFF.”
(With the card remote commander)
Adjusting the equalizer curve
You can store and adjust the equalizer settings
for different tone ranges.
1 Press (MENU).
2 Press (DISC/PRESET) (+) or
(DISC/PRESET) (–) repeatedly until
“EQ7 TUNE” appears, then press
(ENTER).
3 Press (SEEK) (+) or ( SEEK) (–) to
select the desired equalizer curve,
then press (ENTER).
Each time you press (SEEK) (+) or
(SEEK) (–), the item changes.
4 Select the desired frequency and level.
1Press (SEEK) (+) or (SEEK) (–) to
select the desired frequency.
Each time you press ( SEEK) (+) or
(SEEK) (–), the frequency changes.
62 Hz y 157 Hz y 396 Hz y 1 kHz
y 2.5 kHz y 6.3 kHz y 16 kHz
2Press (DISC/PRESET) (+) or
(DISC/PRESET) (–) to adjust the
desired volume level.
The volume level is adjustable by 1 dB
steps from –10 dB to +10 dB.
To restore the factory-set equalizer curve,
press (ENTER) for 2 seconds.
5 Press (MENU) twice.
When the effect setting is complete, the
display returns to normal play mode.