Filter
Top Products
21
Changing the sound and
display settings
— Menu
The following items can be set:
SET (Set Up)
• CLOCK-ADJ (page 10)
• BEEP — to turn the beeps on or off.
• RM (Rotary Commander) — to change the
operative direction of the controls of the rotary
commander.
– Select “NORM” to use the rotary
commander at the factory-set position.
– Select “REV” when you mount the rotary
commander on the right side of the steering
column.
• AUX-A (page 24) — to turn the AUX source
display on or off.
DSPL (Display)
• DEMO — to turn the demonstration display on
or off. (When the unit is turned off.)
– Select “ON” to activate the demonstration
display (The demonstration starts about 10
seconds after the unit is turned off).
– Select “OFF” to deactivate the
demonstration display.
• CLOCK (Clock Information) — to display the
clock and the play mode at the same time (ON).
• DIM (Dimmer) — to change the brightness of
the display.
– Select “AT” to dim the display only when
you turn the lights on.
– Select “ON” to dim the display.
– Select “OFF” to deactivate the Dimmer.
• M.DSPL (Motion Display) — to select the
Motion Display mode from “1,” “2,” and
“OFF.” (When the unit is turned on.)
– Select “1” to show decoration patterns and
spectrum analyzer in the display.
– Select “2” to show decoration patterns in the
display.
– Select “OFF” to deactivate the Motion
Display.
• A.SCRL (Auto Scroll) (page 12)
– Select “ON” to scroll automatically
displayed names exceeding 8 characters.
– When the Auto Scroll function is set to
“OFF” and the disc/album/track is changed,
the disc/album/track name or ID3 tag does
not scroll.
P/M (Play Mode)
• LOCAL (Local Seek mode) (page 15)
– Select “ON” to only tune into stations with
stronger signals.
• MONO (Monaural mode) (page 15)
– Select “ON” to hear FM stereo broadcast in
monaural.
– Select “OFF” to return to normal mode.
• IF AUTO/WIDE (page 15)
SND (Sound)
• EQ7 TUNE (page 22) — to adjust the equalizer
curve.
• HPF (High pass filter) — to select the cut-off
frequency to “78Hz,” “125Hz” or “OFF.”
• LPF (Low pass filter) — to select the cut-off
frequency to “78Hz,” “125Hz” or “OFF.”
• LOUD (Loudness) — to enjoy bass and treble
even at low volumes. The bass and treble will
be reinforced.
• AUX LVL (page 24) — to adjust the volume
level of connected auxiliary equipment.
(With the card remote commander)
1 Press (MENU).
2 Press (DISC/PRESET) (+) or
(DISC/PRESET) (–) repeatedly until the
desired item appears.
3 Press (SEEK) (+) or (SEEK) (–) to
select the desired setting (Example:
“ON” or “OFF”).
4 Press (ENTER).
After the mode setting is complete, the
display returns to normal play mode.
Note
The displayed item will differ depending on the source.
Tip
You can easily switch among categories (“SET,”
“DSPL,” “P/M,” “SND,” and “EDIT”) by pressing
(DISC/PRESET) (+) or (DISC/PRESET) (–) for 2
seconds.