Filter
Top Products
7
Actual total number: Sony CDX-C910 (E,S,C) 3-856-715-11 (2)
EN
CD Player
Playing the stored programme
You can select:
•PGM 1 to play Programme 1.
•PGM 2 to play Programme 2.
•PGM 1+2 to play Programmes 1 and 2.
1 Press (SHIFT).
2 Press (3) (P.MODE) repeatedly until
“PGM” appears.
3 Press (4) (n) repeatedly until the
desired programme appears.
Programme Play starts.
Programme 1 playback
µ
Programme 2 playback
µ
Programmes 1 and 2 playback
µ
Normal playback
4 Press (SHIFT).
To go back to the normal playback mode,
select “PGM off” in step 3 above.
Note
“NO Data” appears in the display if no track is stored in
the programme.
Erasing the entire programme
1 Press (SHIFT), then press (3) (P.MODE)
for two seconds.
2 Press (1) (N) repeatedly until “DEL”
appears.
To delete Programme 2, press (4) (n)
repeatedly until “PGM 2” appears.
3 Press (5) (ENTER) for two seconds.
The entire programme is erased.
4 When you finish erasing programmes,
press (3) (P.MODE) for two seconds.
Adding tracks to the programme
1 Press (SHIFT), then press (3) (P.MODE)
for two seconds.
To select Programme 2, press (4) (n)
repeatedly until “P 2” appears.
2 Press (1) (N) or (4) (n) to select the
track slot number where you want to
insert a track.
3 Press either side of (SEEK/AMS) to select
the track you want to insert.
4 Press (5) (ENTER) momentarily to enter
the track.
The current track in that slot number and
the succeeding tracks shift down.
To continue inserting tracks, repeat steps 2
through 4.
Note
Once all 12 slots have been filled, “*Mem full*”
appears in the display, and you cannot insert tracks.
5 When you finish inserting tracks, press
(3) (P.MODE) for two seconds.
DEL
PGM edit
--PGM1--
SUREQ
P1
PGM edit
NO Data
SUREQ
CD
PGM edit
2 P1.‚2
SUREQ
TRACK
Track slot number
CD
PGM 1
SUREQ
PGM
1
CD
PGM 2
SUREQ
PGM
2
CD
PGM 1+2
SUREQ
PGM
12
+
CD
PGM off
SUREQ