Filter
Top Products
6
Actual total number: Sony CDX-C910 (E,S,C) 3-856-715-11 (2)
EN
SEEK/AMS
To search forward
To search backward
Locating a specific point in a track
— Manual Search
During playback, press and hold either
side of (SEEK/AMS). Release the button
when you have found the desired point.
Note
If “
” or “ ” appears in the display,
that means you have reached the beginning or the end of
the disc and you cannot go any further.
Playing a CD in various
modes
You can play CDs in various modes:
•Intro (Intro Scan) lets you play the first 10
seconds of all the tracks.
•Repeat (Repeat Play) repeats the current
track.
•Shuf (Shuffle Play) plays all the tracks in
random order.
1 Press (SHIFT).
Every time you press (SHIFT), only the
items you can select light up.
2 Press (3) (P.MODE) repeatedly until the
desired play mode appears.
Each time you press (3) (P.MODE), the
item changes as follows:
Intro n Repeat n Shuf n PGM
3 Press (4) (n) to select “on.”
Playback starts.
4 Press (SHIFT).
To go back to the normal playback mode,
select “off” in step 3 above.
SET UP P.MODE
12345
SHIFT
CD
Intro off
SUREQ
CD
Intro on
SUREQ
INTRO
Creating a programme
— CD Programme Memory
You can play the tracks in the order you want
by making your own programme. You can
make two programmes: Programme 1 and
Programme 2. You can select up to 12 tracks in
each programme. You can store the
programmes in memory.
1 Press (SHIFT), then press (3) (P.MODE)
for two seconds.
“P 1” shows Programme 1 is selected.
To select Programme 2, press (4) (n)
repeatedly until “P 2” appears.
2 Press either side of (SEEK/AMS) to select
the track you want.
3 Press (5) (ENTER) momentarily.
4 To continue entering tracks, repeat steps
2 and 3.
5 When you finish selecting tracks, press
(3) (P.MODE) for two seconds.
6 Press (SHIFT).
Notes
• “*Wait*” appears in the display while the unit is reading
the data.
• “*Mem full*” appears in the display when you try to
enter more than 12 tracks into a programme at one time.
CD
PGM edit
12 P1.‚3
SUREQ
TRACK
CD
PGM edit
2 P1.‚2
SUREQ
TRACK
µ
P1
PGM edit
+Enter+
SUREQ