Filter
Top Products
16
Actual total number: Sony CDX-C910 (E,S,C) 3-856-715-11 (2)
EN
Erasing the tracks in the
programme
1 Press (SHIFT), then press (3) (P.MODE)
for two seconds.
If you have labeled the disc, the bank edit
mode appears. Press (3) (P.MODE) to
display “PGM edit” above.
To select Programme 2, press (4) (n)
repeatedly until “P 2” appears.
2 Press (1) (N) or (4) (n) to select the
track you want to erase.
The track currently registered in slot 6 of
Programme 1.
3 Press (5) (ENTER) for two seconds.
When you erase a track from a slot number,
the succeeding tracks shift up to fill the gap.
4 To continue erasing tracks, repeat steps
2 and 3.
5 When you finish erasing tracks, press (3)
(P.MODE) for two seconds.
6 Press (SHIFT).
Track slot number
DEL
PGM edit
P1.‚6
SUREQ
DISC TRACK
CD2
PGM edit
2 4 P1.‚6
SUREQ
DISC TRACK
Labeling a CD
— Disc Memo/Custom File
(CD changer with custom file function)
You can label each disc with a personalized
name. You can enter up to eight characters for
a disc. If you label a CD, you can locate a disc
by name (page 17) and select the specific tracks
for playback (page 18).
1 Play the CD and press (LIST) for two
seconds.
2 Enter the characters.
1 Rotate the dial in a clockwise
direction to select the desired
characters.
(A n B n C n ··· Z n 0 n 1 n 2 n
··· 9 n + n – n * n / n \ n > n <
n . n _ )
If you rotate the dial in a
counterclockwise direction, the
characters appear in the reverse order.
If you want to put a blank space
between characters, select “_” (under-
bar).
2 Press (4) (n) after locating the
desired character.
The flashing cursor moves to the next
space.
If you press (1) (N), the flashing cursor
moves to the left.
3 Repeat steps 1 and 2 to enter the
entire name.
3 To return to the normal CD playback
mode, press (LIST) for two seconds.
Tip
To erase/correct a name, enter “_” (under-bar) for each
character.
CD1
________
4 2 1.13
SUREQ
DISC TRACK
DISC NAME
CD1
S_______
4 2 1.51
SUREQ
DISC TRACK
DISC NAME
CD1
S_______
4 2 2.2‚
SUREQ
DISC TRACK
DISC NAME