Filter
Top Products
8
EN
Track slot number
PLAY MODE ENTER
EQSUR
TRACK
CD
2 P1.‚2
PLAY MODE ENTER
EQSUR
TRACK
CD
4 P1.‚3
To delete Program 2, press (4) (n)
repeatedly until “PGM 2” appears.
3 Press (5) (ENTER) for two seconds.
The entire program is erased.
4 When you finish erasing programs, press
(3) (PLAY MODE) for two seconds.
5 Press (SHIFT).
Adding tracks to a program
1 Press (SHIFT), then press (3) (PLAY
MODE) for two seconds.
“P 1 ” shows Program 1 is selected.
To select Program 2, press (4) (n)
repeatedly until “P 2” appears.
2 Press (1) (N) or (4) (n) to select the
track slot number where you want to
insert a track.
3 Press either side of (SEEK/AMS) to select
the track you want to insert.
4 Press (5) (ENTER) momentarily to enter
the track.
The current track in that slot number and
the succeeding tracks shift down.
5 To continue inserting tracks, repeat steps
2 through 4.
Note
Once all 12 slots have been filled, “*Mem Full*”
appears in the display, and you cannot insert tracks.
6 When you finish inserting tracks, press
(3) (PLAY MODE) for two seconds.
7 Press (SHIFT).
PLAY MODE
EQSUR
PGM
1
CD
PGM 1
PLAY MODE
EQSUR
PGM
2
CD
PGM 2
PLAY MODE
EQSUR
PGM
12
+
CD
PGM 1+2
PLAY MODE
EQSUR
CD
PGM off
PLAY MODE ENTER
EQSUR
TRACK
CD
7 P1.‚8
PLAY MODE ENTER
EQSUR
P1
NO Data
Playing the stored program
You can select:
•PGM 1 to play Program 1.
•PGM 2 to play Program 2.
•PGM 1+2 to play Programs 1 and 2.
1 Press (SHIFT).
2 Press (3) (PLAY MODE) repeatedly until
“PGM” appears.
3 Press (4) (n) repeatedly until the
desired program appears.
Program 1 playback
µ
Program 2 playback
µ
Programs 1 and 2 playback
µ
Normal playback
Program Play starts.
4 Press (SHIFT).
To go back to normal playback mode, select
“PGM off” in step 3 above.
Note
“NO Data” appears in the display if no track is stored in
the program.
Erasing an entire program
1 Press (SHIFT), then press (3) (PLAY
MODE) for two seconds.
“P 1” shows Program 1 is selected.
2 Press (1) (N) repeatedly until “DEL”
appears.
PLAY MODE ENTER
EQSUR
DEL
--PGM1--