Filter
Top Products
14
EN
Changing the sound and
display settings
You can set:
•Clock (page 5).
•D.Info (Dual Information) to display the
clock and the play mode at the same time
(ON) or to display the information
alternately (OFF).
•Amber/Green to change the illumination
color to amber or green.
•Dimmer to change the brightness of the
display.
— Select “Auto” to dim the display only
when you turn the lights on.
— Select “on” to dim the display.
•Contrast to adjust the contrast if the
indications in the display are not
recognizable because of the unit‘s installed
position.
•Beep to turn on or off the beeps.
•RM (Rotary Remote) to change the operative
direction of the controls of the rotary remote.
— Select “norm” to use the rotary remote as
the factory-set position.
— Select “rev” when you mount the rotary
remote on the right side of the steering
column.
•Loud (Loudness) to enjoy bass and treble
even at low volume. The bass and treble will
be reinforced.
•A.Scrl (Auto Scroll) (page 6, 15).
•Disc MEMO/TEXT name (Disc memo/CD-
TEXT name) to set the priority display item
when you connect an optional CD changer
with the CD-TEXT and disc memo function
(page 19).
1 Press (SHIFT).
2 Press (2) (SET UP) repeatedly until the
desired item appears.
Each time you press (2) (SET UP), the item
changes as follows:
Clock n D.Info* n Amber/Green n Dimmer
n Contrast n Beep n RM n Loud* n
A.Scrl* n Disc MEMO/TEXT name*
* When you have not tune the station or there is no
CD/MD being played, these items will not appear.
Note
The displayed item will differ depending on the source.
3 Press (4) (n) to select the desired
setting (for example: on or off).
For the ”Contrast“ setting, pressing (4)
(n) makes the contrast higher, and
pressing (1) (N) makes the contrast lower.
4 Press (SHIFT).
After the mode setting is complete, the
display goes back to normal playback
mode.