Filter
Top Products
18
EN
Track slot number
µ
PLAY MODE ENTER
EQSUR
DISC TRACK
CD2
3 2 P1.‚7
PLAY MODE ENTER
EQSUR
DISC TRACK
CD2
3 3 P1.‚6
PLAY MODE ENTER
EQSUR
DISC TRACK
DEL
- -- P1.‚6
PLAY MODE ENTER
EQSUR
DISC TRACK
CD2
4 7 P1.‚6
4 Press (5) (ENTER) momentarily to enter
the track.
The current track in that slot number and
the succeeding tracks shift down.
To continue inserting tracks, repeat steps 2
through 4.
Note
Once all 12 slots have been filled, “*Mem Full*”
appears in the display, and you cannot insert tracks.
5 When you finish inserting tracks, press
(3) (PLAY MODE) for two seconds.
6 Press (SHIFT).
Erasing tracks in a program
1 Press (SHIFT), then press (3) (PLAY
MODE) for two seconds.
“P 1” shows Program 1 is selected.
If you have labelled the disc, the bank edit
mode appears. Press (3) (PLAY MODE) to
display “P 1” above.
To select Program 2, press (4) (n)
repeatedly until “P 2” appears.
2 Press (1) (N) or (4) (n) to select the
track you want to erase.
The track currently registered in slot 6 of
Program 1.
3 Press (5) (ENTER) for two seconds.
When you erase a track from a slot number,
the succeeding tracks shift up to fill the gap.
4 To continue erasing tracks, repeat steps
2 and 3.
5 When you finish erasing tracks, press (3)
(PLAY MODE) for two seconds.
6 Press (SHIFT).
Track slot number
PLAY MODE ENTER
EQSUR
P1
NO Data
PLAY MODE ENTER
EQSUR
DISC TRACK
CD2
4 7 P1.‚8
PLAY MODE ENTER
EQSUR
DISC TRACK
CD2
3 2 P1.‚5
Erasing an entire program
1 Press (SHIFT), then press (3) (PLAY
MODE) for two seconds.
“P 1” shows Program 1 is selected.
If you have labelled the disc, the bank edit
mode appears. Press (3) (PLAY MODE) to
display “P 1” above.
2 Press (1) (N) repeatedly until “DEL”
appears.
To erase Program 2, press (4) (n)
repeatedly until “PGM 2” appears.
3 Press (5) (ENTER) for two seconds.
The entire program is erased.
4 When you finish erasing programs, press
(3) (PLAY MODE) for two seconds.
5 Press (SHIFT).
Adding tracks to a program
1 Press (SHIFT), then press (3) (PLAY
MODE) for two seconds.
“P 1” shows Program 1 is selected.
If you have labelled the disc, the bank edit
mode appears. Press (3) (PLAY MODE) to
display “P 1” above.
To select Program 2, press (4) (n)
repeatedly until “P 2” appears.
2 Press (1) (N) or (4) (n) to select the
track slot number where you want to
insert a track.
3 Press either side of (SEEK/AMS) to select
the track you want to insert.
PLAY MODE ENTER
EQSUR
DISC TRACK
CD2
4 7 P1.‚8
PLAY MODE ENTER
EQSUR
DEL
--PGM1--