Filter
Top Products
18
Actual total number: Sony CDX-C610RDS (E,F,G,I) 3-856-122-12(2)
EN
Labeling a CD — Disc Memo
(CD changer with custom file function)
You can label each disc with a personalized
name. You can enter up to eight characters for
a disc. If you label a CD, you can locate a disc
by name and select the specific tracks for
playback (page 19).
1 Play the CD and press (LIST) for two
seconds.
2 Enter the characters.
1 Press (+) to select the desired
characters.
(A n B n C n ··· Z n 0 n 1 n 2 n
··· 9 n + n – n * n / n \ n > n <
n . n _ )
If you press (–), the characters appear
in the reverse order.
If you want to put a blank space
between characters, select “_” (under-
bar).
2 Press (4) (n) after locating the
desired character.
The flashing cursor moves to the next
space.
If you press (1) (N), the flashing cursor
moves to the left.
3 Repeat steps 1 and 2 to enter the
entire name.
3 To return to the normal CD playback
mode, press (LIST) for two seconds.
Tip
To erase/correct a name, enter “_” (under-bar) for each
character.
Erasing the tracks in the
programme
1 Press (SHIFT), then press (3) (PLAY
MODE) for two seconds.
“P 1” shows Programme 1 is selected.
If you have labelled the disc, the bank edit
mode appears. Press (3) (PLAY MODE) to
display “P 1” above.
To select Programme 2, press (4) (n)
repeatedly until “P 2” appears.
2 Press (1) (N) or (4) (n) to select the
track you want to erase.
The track currently registered in slot 6 of
Programme 1.
3 Press (5) (ENTER) for two seconds.
When you erase a track from a slot number,
the succeeding tracks shift up to fill the gap.
4 To continue erasing tracks, repeat steps
2 and 3.
5 When you finish erasing tracks, press (3)
(PLAY MODE) for two seconds.
µ
SUR
PLAY MODE ENTER
DISC
TRACK
-
DEL
EQ
-- P106
SUR
PLAY MODE ENTER
DISC
TRACK
4
CD2
EQ
7 P106
SUR
PLAY MODE ENTER
DISC
TRACK
3
CD2
EQ
3 P106
Track slot number
SUR
PLAY MODE ENTER
DISC
TRACK
3
CD2
EQ
2 P107
SUR
DISC
DISCNAME
1
CD1
EQ
SUR
DISC
DISCNAME
1
CD1
EQ
S
SUR
DISC
DISCNAME
1
CD1
EQ
S