Filter
Top Products
17
Actual total number: Sony CDX-C610RDS (E,F,G,I) 3-856-122-12(2)
EN
2 Press (1) (N) repeatedly until “DEL”
appears.
To erase Programme 2, press (4) (n)
repeatedly until “PGM 2” appears.
3 Press (5) (ENTER) for two seconds.
The entire programme is erased.
4 When you finish erasing programmes,
press (3) (PLAY MODE) for two seconds.
Adding tracks to the programme
1 Press (SHIFT), then press (3) (PLAY
MODE) for two seconds.
“P 1” shows Programme 1 is selected.
If you have labelled the disc, the bank edit
mode appears. Press (3) (PLAY MODE) to
display “P 1” above.
To select Programme 2, press (4) (n)
repeatedly until “P 2” appears.
2 Press (1) (N) or (4) (n) to select the
track slot number where you want to
insert a track.
3 Press either side of (SEEK/AMS) to select
the track you want to insert.
4 Press (5) (ENTER) momentarily to enter
the track.
The current track in that slot number and
the succeeding tracks shift down.
To continue inserting tracks, repeat steps 2
through 4.
Note
Once all 12 slots have been filled, “*FULL*” appears
in the display, and you cannot insert tracks.
5 When you finish inserting tracks, press
(3) (PLAY MODE) for two seconds.
SUR
PLAY MODE ENTER
DEL
EQ
--PGM1--
SUR
PLAY MODE ENTER
P1
EQ
NO DATA
SUR
PLAY MODE ENTER
DISC
TRACK
4
CD2
EQ
7 P108
CD/MD Changer
SUR
PLAY MODE ENTER
DISC
TRACK
3
CD2
EQ
2 P105
Track slot number
Notes
• “*WAIT*” appears in the display while the unit is
reading the data, or when a disc has not been put into the
unit.
• “*FULL*” appears in the display when you try to enter
more than 12 tracks into a programme at one time.
Playing the stored programme
Changing the disc order in the changer will not
affect programme memory play.
You can select:
•PGM 1 to play Programme 1.
•PGM 2 to play Programme 2.
•PGM 1+2 to play Programmes 1 and 2.
1 Press (SHIFT).
2 Press (3) (PLAY MODE) repeatedly until
“PGM” appears.
3 Press (4) (n) repeatedly until the
desired program appears.
z PGM-1 z PGM-2 z PGM-1+2
PGM-OFF Z
Progarmme Play starts.
To go back to the normal playback mode,
select “PGM-OFF” in step 3 above.
Notes
• If you press the number button during programme
memory play, programme memory play is interrupted,
and playback of the selected disc starts.
• “NO DATA” appears in the display if no track is stored
in the programme.
• If a track stored into the programme memory is not in the
disc magazine, the track will be skipped.
• When the disc magazine contains not a single track
stored into the programme memory, or when the
programme information tracks has not been loaded yet,
“NO READY” appears.
Erasing the entire programme
1 Press (SHIFT), then press (3) (PLAY
MODE) for two seconds.
“P 1” shows Programme 1 is selected.
If you have labelled the disc, the bank edit
mode appears. Press (3) (PLAY MODE) to
display “P 1” above.
SUR
PLAY MODE ENTER
DISC
TRACK
4
CD2
EQ
7 P108