Filter
Top Products
15
Actual total number: Sony CDX-C610RDS (E,F,G,I) 3-856-122-12(2)
EN
Other Functions/CD/MD Changer
Displaying the recording date of
the currently selected MD
Press (DSPL) for two seconds during MD
playback.
The recording date of the track is displayed
for about three seconds.
Locating a specific track
— Automatic Music Sensor (AMS)
During playback, press either side of
(SEEK/AMS) once for each track you
want to skip.
Locating a specific point in a track
— Manual Search
During playback, press and hold either
side of (SEEK/AMS). Release the button
when you have found the desired point.
Locating a disc by disc number
— Direct Disc Selection
Press the number button that
corresponds with the desired disc
number.
The desired disc in the currently selected
changer begins playback.
Scanning the tracks
— Intro Scan
You can play the first 10 seconds of all the
tracks on the currently selected disc.
1 During playback, press (SHIFT), then
press (3) (PLAY MODE) repeatedly until
“INTRO” appears.
2 Press (4) (n) to select “INTRO-ON.”
Intro Scan starts.
To go back to the normal playback mode,
select “INTRO-OFF” in step 2 above.
SEEK/AMS
To locate succeeding tracks
To locate previous tracks
SEEK/AMS
To search forward
To search backward
With Optional Equipment
CD/MD Changer
You can control up to 10 CD changers and MD
changers with this unit.
Playing a CD or MD
Press (SOURCE) until the desired
changer appears.
CD/MD playback starts.
When a CD or MD changer is connected, all
the tracks play from the beginning.
Changing the displayed items
Each time you press (DSPL) during CD/MD
playback, the item changes as follows:
$
Elapsed playback time
$
Disc name*
1
$
Track name*
2
$
Clock*
3
*
1
If there is no prerecorded name for a CD or MD, “NO
NAME” appears in the display.
*
2
If the track name of an MD is not prerecorded, “NO
NAME” appears in the display.
*
3
If the dual information is on, clock does not appear in
the display.
Tip
If the name of the MD is too long, you can scroll it across
the display window by pressing (SHIFT), then (1) (N).
Automatically scrolling a disc name
— Auto Scroll
The Auto Scroll function automatically scrolls
the disc or track name of the MD when you
press (DSPL) and the title length exceeds eight
characters.
1 Press (SHIFT), then press (2) (SET UP)
repeatedly until “A.SCRL” appears.
2 Press (4) (n) to select “A.SCRL-ON.”
To cancel Auto Scroll, select “A.SCRL-OFF” in
step 2 above.