Filter
Top Products
Getting StartedGetting Started
7
US
I / 1
Changing the command mode of the player
1 Press MENU/NO.
2 Turn the JOG dial until “COMMAND MODE?”
appears in the display.
3 Push the JOG dial.
The current command mode appears.
4 Turn the JOG dial to select CD1 or CD2, then push
the JOG dial again.
Note
The factory setting is CD1. The COMMAND MODE of the
remote commander is also set to CD1.You don't need to
change the setting.
MENU/NO
SECSTEPMINART.
GROUPTRACK
HITART.NEXT2nd DISC
1
GROUP
NO DELAY
TEXTCDMULTI
PROGRAM 123 X-FADE DELETE
CD3
REPEATSHUFFLE1
CD1 CD2
ALL SDISC
* CD1[CD ]C2D3*
Current command mode
JOG
Inserting CDs
You can insert up to 400 discs into this player.
1 Press ?/1 to turn on the player.
2 Open the front cover by pressing OPEN/CLOSE.
3 Turn the JOG dial until you find the disc slot
where you want to insert a disc, while checking the
disc number (written beside every slot and also
indicated in the small display).
Rotary table
Loading position
Playing position
OPEN/CLOSE
JOG
?/1
Top view of the disc slot
Disc slot at the loading position
Disc number
(continued)
Small
display
COMMAND MODE