Filter
Top Products
20
GB
Additional Information
Specifications
Compact disc player
Laser Semiconductor laser (λ = 800 nm)
Emission duration: continuous
Inputs/Outputs (i.LINK S200)
i.LINK connector 4 pins - 4 pins (S200)
General
Power requirements 230 V AC, 50/60 Hz
Power consumption 22 W
Dimensions (approx.) (w/h/d)
430 × 70 × 315 mm
incl. projecting parts
Mass (approx.) 4.6 kg
Supplied accessories
i.LINK connecting calbe (4 pins - 4 pins) (1)
Remote commander (remote) (1)
Design and specifications are subject to change without
notice.
Display Messages
The following table explains the various messages that
appear in the display.
Message Error code(s) Cause and/or remedy
CANNOT
LINC
C78:11/C78:12 The player cannot establish
a LINC with a component
because of an existing LINC
between the player and
another component. Cancel
the LINC between the
player and the other
component.
BUS FULL C78:15 The signal bus within the
i.LINK configuration is full
and no more signals can be
output from the player.
Cancel the LINC between
the component and the
player.
LOOP
CONNECT
C78:03 The i.LINK connection is
looped. Check the
connection (see page 17).
NEW
CONNECT
— An i.LINK component has
been connected to or
disconnected from the
i.LINK configuration. Wait
several seconds for the
indication to turn off.