Sony BDV-F500 Home Theater System User Manual


 
19
GB
Getting Started
1 Prepare screws (not supplied) that are suitable for the hole on the back of each speaker.
See the illustrations below.
Note
The length and type of the screw are examples. Select screws in accordance with the material or strength of
the wall to which you install the speakers.
2 Fasten the screws to the wall.
3 Hang the speakers on the screws.
Note
Be careful not to pinch the speaker cords while tightening the screws.
30 mm
4 mm
Hole on the back of
the speaker
5 mm
10 mm
8 to 10 mm
5 mm
10 mm
Hole on the back of
the speaker
Rear of the speaker