Filter
Top Products
Additional Information
69
US
than 1% total harmonic
distortion from 250 milli
watts to rated output.
POWER OUTPUT (reference)
167 W (per channel at 3
ohms, 1 kHz)
Rated impedance 3 - 16 Ω
General
Power requirements 120 V AC, 60 Hz
Power consumption On: 50 W
Standby power consumption
0.9 W (standby mode)
0.13 W (turned off)
Dimensions (approx.) 206 mm × 60 mm × 256
mm (8
1
/8 in × 2
3
/8 in × 10
1
/8 in) (w/h/d) with the
wireless transceiver
inserted
Mass (approx.) 1.3 kg (2 lb 14 oz)
Wireless transceiver (EZW-RT10/EZW-
RT10A)
Communication system S-AIR Specification
version 1.0
Frequency band 2.4000 GHz - 2.4835 GHz
Modulation method DSSS
Power requirements DC 3.3 V, 350 mA
Dimensions (approx.) 50 mm × 13 mm × 60 mm
(2 in ×
17
/32 in × 2
3
/8 in) (w/
h/d)
Mass (approx.) 24 g (1 oz)
USB Wireless LAN Adapter (UWA-BR100)
Standards Compliance: IEEE 802.11a/b/g/n
Host Interface: USB 2.0
Security: 64/128 bit: WEP, WPA/
WPA2, WPS
Frequency and Channel*: 2.4 GHz - 2.4835 GHz
[CH1 - 11]
5.15 GHz - 5.25 GHz
[CH36 - 48]
5.25 GHz - 5.35 GHz
[CH52 - 64]
5.47 GHz - 5.725 GHz
[CH100 - 140]
5.725 GHz - 5.85 GHz
[CH149 - 165]
Data Rate**: 802.11a/g: 54, 48, 36, 24,
18, 12, 9 and 6 Mbps
802.11b: 11, 5.5, 2 and 1
Mbps
802.11n: up to 300 Mbps
(40 MHz/spatial streams:
2)
Power consumption: Tx: up to 500 mA
Mass (Approx.): USB Wireless LAN
Adapter: 27 g (1 oz)
Dimensions (Approx.) (w × h × d):
USB Wireless LAN
Adapter: 96 mm × 14 mm
× 27 mm (3
7
/8 in ×
9
/16 in ×
1
1
/8 in)
* The frequency and channel differ depending on the
area.
**The transmission speed differs depending on the
distance and number of obstructions between the
transmission products, the configuration of
products, the radio wave conditions, the line traffic,
and the products that you use. The transmission may
also be cut off depending on the radio wave
conditions. The standard values of the transmission
speed are the theoretical maximum values for the
wireless standards. They are not the actual speeds of
data transmission.
Design and specifications are subject to change
without notice.
• Standby power consumption 0.3W (main unit),
0.13W (surround amplifier).
• Halogenated flame retardants are not used in the
certain printed wiring boards.
• Over 85% power efficiency of amplifier block is
achieved with the full digital amplifier, S-Master.