Filter
Top Products
68
US
Specifications
Amplifier Section
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
(FTC)
Front L + Front R: With 3 ohms loads, both
channels driven, from 180
- 20,000 Hz; rated 60 watts
per channel minimum
RMS power, with no more
than 1% total harmonic
distortion from 250 milli
watts to rated output.
POWER OUTPUT (reference)
Front L/Front R/Center: 167 W (per channel at 3
ohms, 1 kHz)
Subwoofer: 165 W (at 3 ohms, 80 Hz)
Inputs (Analog)
AUDIO (AUDIO IN) Sensitivity: 450/250 mV
Inputs (Digital)
SAT/CABLE (COAXIAL), TV (OPTICAL)
Supported formats: LPCM
2CH (up to 48 kHz), Dolby
Digital, DTS
Video Section
Outputs VIDEO: 1 Vp-p 75 ohms
COMPONENT:
Y: 1 Vp-p 75 ohms
PB/CB, PR/CR: 0.7 Vp-p
75 ohms
HDMI OUT: Type A (19
pin)
BD/DVD/Super Audio CD/CD System
Signal format system NTSC
USB Section
(USB) port: Type A (For connecting
USB memory, memory
card reader, digital still
camera, and digital video
camera)
Maximum current: 500 mA
LAN Section
LAN (100) terminal 100BASE-TX Terminal
Tuner Section
System PLL quartz-locked digital
synthesizer
FM tuner section
Tuning range 87.5 MHz - 108.0 MHz
(100 kHz step)
Antenna (aerial) FM wire antenna (aerial)
Antenna (aerial) terminals 75 ohms, unbalanced
Intermediate frequency 10.7 MHz
Speakers
Front/Surround (SS-TSB101)
Speaker system Full range Bass reflex
Speaker unit 55 mm × 80 mm (2
1
/4 in ×
3
1
/4 in) cone type
Rated impedance 3 ohms
Dimensions (approx.) 75 mm × 225 mm × 71 mm
(3 in × 8
7
/8 in ×
2
7
/8 in) (w/h/d)
Mass (approx.) 0.45 kg (1 lb)
Center (SS-CTB101)
Speaker system Full range Acoustic
suspension
Speaker unit 30 mm × 60 mm (1
3
/16 in ×
2
3
/8 in) cone type
Rated impedance 3 ohms
Dimensions (approx.) 290 mm × 49 mm × 49 mm
(11
1
/2 in × 1
15
/16 in ×
1
15
/16 in) (w/h/d)
Mass (approx.) 0.28 kg (10 oz)
Subwoofer (SS-WSB102)
Speaker system Subwoofer Bass reflex
Speaker unit 180 mm (7
1
/8 in) cone type
Rated impedance 3 ohms
Dimensions (approx.) 275 mm × 405 mm × 275
mm (10
7
/8 in × 16 in ×
10
7
/8 in) (w/h/d)
Mass (approx.) 7.5 kg (16 lb 12 oz)
General
Power requirements 120 V AC, 60 Hz
Power consumption On: 130 W
Standby: 0.3 W (at the
Power Saving mode)
Dimensions (approx.) 430 mm × 85 mm × 335
mm (17 in × 3
3
/8 in ×
13
1
/4 in) (w/h/d) incl.
projecting parts
430 mm × 85 mm × 365
mm (17 in × 3
3
/8 in ×
14
3
/8 in) (w/h/d) (incl.
wireless transceiver)
Mass (approx.) 4.7 kg (10 lb 6 oz)
Surround amplifier (TA-SA200WR)
Amplifier Section
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
(FTC) With 3 ohms loads, both
channels driven, from 120
- 20,000 Hz; rated 45 watts
per channel minimum
RMS power, with no more