Sony BDV-E280 Stereo System User Manual


 
Settings and Adjustments
51
US
[Music Settings]
You can make detailed settings for Super Audio
CD playback.
x[Super Audio CD Playback Layer]
[Super Audio CD]: Plays the Super Audio CD
layer.
[CD]: Plays the CD layer.
x[Super Audio CD Playback Channel]
[DSD 2ch]: Plays the 2ch area.
[DSD Multi]
: Plays the multi-channel area.
[System Settings]
You can make the system-related settings.
x[OSD]
You can select your language for the system on-
screen displays.
x[HDMI Settings]
[Control for HDMI]
[On]
: On. You can operate mutually between
components that are connected with an HDMI
cable.
[Off]: Off.
[Audio Return Channel]
This function is available when you connect the
system and TV that is compatible with the Audio
Return Channel function.
[Auto]
: The system can receive the digital audio
signal of the TV automatically via an HDMI
cable.
[Off]: Off.
•This function is available only when [Control for
HDMI] is set to [On].
x[Quick Start Mode]
[On]: Shortens the startup time from standby
mode. You can operate the system quickly after
turning it on.
[Off]
: The default setting.
x[Auto Standby]
[On]: Turns on the [Auto Standby] function.
When you do not operate the system for about
30 minutes, the system enters standby mode
automatically.
[Off]: Turns off the function.
x[Auto Display]
[On]: Automatically displays information on the
screen when changing the viewing titles, picture
modes, audio signals, etc.
[Off]: Displays information only when you
press
DISPLAY.
x[Screen Saver]
[On]: Turns on the screen saver function.
[Off]: Off.
x[Software Update Notification]
[On]: Sets the system to inform you of newer
software version information (page 47).
[Off]: Off.
x[System Information]
You can display the system’s software version
information and the MAC address.
[Network Settings]
You can make detailed settings for Internet and
network.
x[Internet Settings]
Connect the system to the network beforehand.
For details, see “Step 3: Connecting to the
Network” (page 20).
x[Network Connection Diagnostics]
You can run the network diagnostic to check if
the network connection has been made properly.