Sony BDC-T79 Home Theater System User Manual


 
Other Operations
35
US
Using the Control for
HDMI Function for
“BRAVIA” Sync
This function is available on TVs with the
“BRAVIA” Sync function.
By connecting Sony components that are
compatible with the Control for HDMI function
via an HDMI cable, operation is simplified.
•To use the “BRAVIA” Sync function, turn on the
system and all components that are connected to the
system after connecting them with an HDMI cable.
Control for HDMI - Easy Setting
You can set the system’s [Control for HDMI]
function automatically by enabling the
corresponding setting on the TV.
For details about the Control for HDMI
function, see “[HDMI Settings]” (page 46)
System Power Off
You can turn the system off in sync with the TV.
•The system does not turn off automatically while
playing music or when set to the “FM” function.
One-Touch Play
When you press N on the remote, the system
and your TV turn on, and your TV’s input is set
to the HDMI input to which the system is
connected.
System Audio Control
You can simplify operation to enjoy sound from
the TV or other components.
You can use the System Audio Control function
as follows:
When the system is turned on, the sound of the
TV or other components can be output from
the speakers of the system.
When sound from the TV or other components
is output via the speakers of the system, you
can change the speakers to which TV sound is
output by pressing
SPEAKERS TVyAUDIO.
When sound from the TV or other components
is output via the speakers of the system, you
can adjust the volume and turn off the sound of
the system by operating the TV.
Audio Return Channel
You can enjoy TV sound via the system by using
just one HDMI cable. For details of the setting,
see “[Audio Return Channel]” (page 46).
Language Follow
When you change the language for the on-screen
display of the TV, the system’s on-screen
display language is also changed after turning
the system off and on.
Routing Control
When you perform One-Touch Play on the
connected component, the system turns on and
sets the system’s function to “HDMI1” or
“HDMI2” (depending on the HDMI input jack
in use), and your TV’s input is automatically set
to the HDMI input to which the system is
connected.
Calibrating the
Appropriate Speaker
Settings Automatically
[Auto Calibration]
D.C.A.C. (Digital Cinema Auto Calibration)
brings you the ideal sound experience by
automatically adjusting the setting of the
speakers’ distance, location, and characteristic.
• The system outputs a loud test sound when [Auto
Calibration] starts. You cannot turn the volume
down. Give consideration to children and neighbors.
• Before [Auto Calibration], make sure that all the
speakers are connected to the unit and surround
amplifier.
1 Press HOME.
The home menu appears on the TV screen.
Other Operations