Filter
Top Products
47
GB
Amplifier Operations
Adjusting the level
(LEVEL menu)
You can use the LEVEL menu to adjust the
balance and level of each speaker. These
settings are applied to all sound fields.
Select “LEVEL” in the amplifier menus. For
details on adjusting the parameters, see
“Navigating through menus” (page 42) and
“Overview of the menus” (page 43).
LEVEL menu parameters
x TEST TONE (Test tone)
Lets you adjust the speaker levels and balance
while listening to the test tone from your
listening position.
•OFF
The test tone is turned off.
•FIX xxx
*
The test tone is output from the speaker you
have selected.
• AUTO xxx
*
The test tone is output from each speaker in
sequence.
* xxx
represent a speaker channel.
x P. NOISE (Phase noise)
•OFF
The phase noise is turned off.
•
FL/SR, SL/FL, SBL/SL, SBR/SBL,
SR/SBR, SR/SL, FR/SR, FR/SL, CNT/FR,
FL/CNT
Lets you output the test tone sequentially
from adjacent speakers.
Some items may not be displayed,
depending on the setting of the speaker
pattern.
x P. AUDIO (Phase Audio)
•OFF
•
FL/SR, SL/FL, SBL/SL, SBR/SBL,
SR/SBR, SR/SL, FR/SR, FR/SL, CNT/FR,
FL/CNT
Lets you output front 2 channel source sound
(instead of the test tone) sequentially from
adjacent speakers.
Some items may not be displayed,
depending on the setting of the speaker
pattern.
x FL LEVEL (Front left speaker
level)
x FR LEVEL (Front right speaker
level)
x CNT LEVEL (Center speaker
level)
x SL LEVEL (Surround left speaker
level)
x SR LEVEL (Surround right
speaker level)
x SB LEVEL (Surround back
speaker level)
x SBL LEVEL (Surround back left
speaker level)
x SBR LEVEL (Surround back
right speaker level)
x SW LEVEL (Subwoofer level)
Note
Depends on the speaker pattern setting, some
parameters may not be available.
continued