Filter
Top Products
18
GB
MHC-GX470/RG590S/RG490S/RG290/RG190.GB.2-668-367-11(1)
Recording onto a tape
(CD Synchro recording/Manual
recording/Sound Mixing)
You can record on a TYPE I (normal) tape in
three ways:
CD Synchro Recording:
You can record an entire CD onto a tape. The
recording level is adjusted automatically.
Manual Recording:
You can record just the portions you like from
a sound source, including connected audio
components.
Sound Mixing (Latin American model
only):
You can “mix” sounds by playing one of the
components and singing or speaking into a
microphone (not supplied). The mixed sound
can be recorded onto a tape.
Use buttons on the unit to control tape
recording.
1
Load a recordable tape into deck
B with the side you want to record
facing forward, and then press
TAPE A/B
repeatedly to select
TAPE B.
2
Prepare the recording source.
For CD Synchro Recording:
Press CD
to select the CD function.
Load the disc you want to record, and press
DISC SKIP
repeatedly to select the
disc.
When recording a folder from an MP3
disc, press PLAY MODE
on the remote
repeatedly to select “ ,” and then press
+/–
repeatedly to select the desired
folder.
To record only your favorite CD tracks or
MP3 files in your desired order, perform
steps 2 to 6 of “Creating your own CD
program” (page 16).
For Manual Recording and Sound
Mixing:
Select the desired source to record or mix.
To record only sound from a microphone,
press CD
, and do not start playing any
other source in step 4.
3
Set deck B to stand by for
recording.
For CD Synchro Recording:
Press CD SYNC
.
For Manual Recording and Sound
Mixing:
Press REC PAUSE/START
.