Filter
Top Products
49
GB
Tuner Operations
2 Hold down MEMORY and press
?/1 to turn the receiver back on.
“AUTO-BETICAL SELECT” appears on
the display and the receiver scans and
stores all the FM and FM RDS stations in
the broadcast area.
For RDS stations, the tuner first checks
for stations broadcasting the same
program, then stores only the ones with
the clearest signal. The selected RDS
stations are sorted alphabetically by their
Program Service name, then assigned a 2-
character preset code. For more details on
RDS, see page 52.
Regular FM stations are assigned 2-
character preset codes and stored after the
RDS stations.
When this process is finished, “FINISH”
appears on the display momentarily and
the receiver returns to normal operation.
Notes
• Do not press any button on the receiver or supplied
remote during autobetical operation, except ?/1.
• If you move to another area, repeat this procedure
to store stations in your new area.
• For details on tuning the stored stations, see
“Tuning to preset stations” (page 50).
• If you move the antenna after storing stations with
this procedure, the stored settings may no longer be
valid. If this happens, repeat this procedure to store
the stations again.
Presetting radio stations
You can preset up to 30 FM stations and 30
AM stations. Then you can easily tune in the
stations you often listen to.
1 Press TUNER repeatedly to
select the FM or AM band.
You can also use FM or AM on the
receiver.
2 Tune in the station that you
want to preset using Automatic
Tuning (page 47) or Direct
Tuning (page 48).
Switch the FM reception mode, if
necessary (page 47).
Presetting radio stations
123
46
78
0/10
ENTER
9
VIDEO 1 VIDEO 2 DVD SA-CD/CD
2CH A.F.D.
RETURN/EXIT
TV CH –
PRESET –
TV CH +
PRESET +
TUNING – TUNING +
REPLAY ADVANCE
MENU
MOVIE MUSIC
MEMORY DVD MENU
CLEAR
TOOLSDISPLAY
MUTING
TV VOL
MASTER VOL
FM MODE
D.TUNING
D.SKIP
DUAL MONO
TUNER
AMP MENU
>10/
-
F
Gg
f
.
HmM
<
<
>
5
1
3,5
TUNING
+/–
4
continued