Filter
Top Products
Tape – Playback
15
GB
You can listen to a radio station either by
selecting a preset station, or by manually tuning
in the station.
Listening to a preset station
— Preset Tuning
Before tuning to preset stations, be sure to preset
them, see “Presetting radio stations” (page 13).
1 Press TUNER/BAND repeatedly to
select “FM” or “AM”.
2 Press TUNING MODE on the remote
repeatedly until “PRESET” lights up in
the display.
3 Press TUNING +/– (or press –. or
>+ on the remote) repeatedly to
select the preset station you want.
Listening to a non-preset
radio station
— Manual Tuning
1 Press TUNER/BAND repeatedly to
select “FM” or “AM”.
2 Press TUNING MODE on the remote
repeatedly until “MANUAL” lights up in
the display.
3 Press TUNING +/– (or press –. or
>+ on the remote) repeatedly to tune
in the station you want.
Tips
• When an FM stereo program has static noise, press
FM MODE on the remote repeatedly until “MONO”
lights up in the display. There will be no stereo effect,
but the reception will improve.
• To record the radio programs, see “Recording on a
tape manually” (page 17) or “Timer recording radio
programs” (page 23).
• You can also press FUNCTION on the remote
repeatedly to select “TUNER”.
• To improve broadcast reception, adjust the supplied
antennas, or connect an external antenna.
1 Push A Z (Deck A) or B Z (Deck B) on
the selected deck.
2 Load a tape into Deck A or B.
3 Push the center of the tape lid to close
the deck.
You can use TYPE I (normal) tape.
1 Load a tape.
2 Press TAPE A/B (or TAPE on the
remote) repeatedly until “TAPE A” or
“TAPE B” appears in the display.
3 Press DIRECTION repeatedly to select
one way or relay play
*1
to play back
both decks in succession.
Listening to the radio
FrequencyPreset number
Tape – Playback
Loading a tape
Playing a tape
t
A
Push here
to eject the
tape deck
With the side
you want to
play back or
record facing
forward
continued