Filter
Top Products
17
01GB02CD-EUR.fm masterpage:Right
CDX-NC9950
2-581-922-11 (1)
Display items
Information on the station/frequency currently
selected is automatically displayed.
Positions of display items differ depending on
the selected face pattern.
For details, see “Selecting the face pattern” on
page 20.
When “Skin1” is selected.
When “Skin2” is selected.
When “Skin3” is selected.
A Source/Band number
B Function and mode status
ST: Stereo reception mode
:ATT
AF: AF function
TA: Traffic announcements
TP: Traffic programme
:DSO
:EQ7
C :Preset number/Frequency, Current status/
Messages
Receiving the stored stations
1 Press (SOURCE) repeatedly to select
the radio.
2 Press (MODE) repeatedly to select the
desired band.
Radio reception of the desired band starts.
Operation by the card remote
commander:
Operation by the main unit:
* To stop searching, rotate the R dial in the reverse
direction.
Tip
If automatic tuning stops too frequently, set “Local” in
“PlayMode” to “ON.” Only the stations with relatively
strong signal will be tuned in (Local seek mode).
If FM stereo reception is poor
— Mono
1 Set “Mono” in “PlayMode” to “ON.”
The sound improves, but becomes monaural.
To restore stereo reception, set to “OFF.”
Tip
If FM broadcasts are difficult to hear, set “DSO” in
“Sound” to “OFF” (
page 25).
A B
C
A C B
A C
B
To
Stop radio
reception
Press (OFF).
Receive stored
stations
–Preset search
Press (1) to (6).
Press M/m
[until the desired station].
Search stations
–Automatic tuning
Press </,
[until the desired station].
Specify
frequencies
–Manual tuning
Press </,
[hold until the desired
frequency].
To
Stop radio
reception
Press (OFF).
Receive stored
stations
–Preset search
Rotate the R dial
[until the desired station].
Search stations
–Automatic tuning
Press (ENTER) once, then
rotate the R dial*
[until the desired station].
Specify
frequencies
–Manual tuning
Press (ENTER) twice, then
rotate the R dial
[until the desired
frequency].