Sirius Satellite Radio XTR3CK Satellite Radio User Manual


 
15
Direct Tuning (Remote Only)
Your XACT Visor Sirius Satellite Radio enables you to tune to a selected channel directly. This feature is only
available through the Remote Control.
1. Press the DIR button on the Remote Control to activate the Direct Tuning mode.
2. The corresponding window is displayed and asks you to enter the desired channel number (3 digits).
3. The XACT Visor Sirius Satellite Radio Receiver will be tuned to your selected channel..
Presetting Channels
Your XACT Visor Sirius Satellite Radio Receiver allows you to preset 36 channels. This design enables you to
directly select between 6 different bands of preset channels (identified as A, B, C, D, E and F). Each band
contains 6 specific channels (indicated as A-1, A-2, A-3....F-4, F-5 and F-6).
1. Tune to the channel you wish to store.
2. Press the BAND button to switch to your desired band (A-F) according to your preference.
3. Once the desired band is set, press and hold the 1, 2, 3, 4, 5, or 6 numerical buttons to store the specific
channel. The Channel will now be recorded in memory.
Note: If a channel is already recorded into a preset, the new channel will overwrite the old one.
15