Filter
Top Products
11
AM/FM RADIO OPERATION
To Listen To The Radio
1. Press the FUNCTION button to enter the RADIO Mode. Press the ALBUM / BAND button to Select a
band (AM or FM). If listening to FM, Press the MODE button to select Stereo or Mono.
2. Press and release the Skip/TUNING DN (12) or UP (13) button to tune a station. Press and hold the
Skip/TUNING DN (12) or UP (13) button for rapid search tuning.
3. Adjust the VOLUME control. If FM STEREO reception is weak/noisy, press the MODE/ button (10) to
Mono, in this case the reception will be monaural.
4. To turn the radio off, rotate POWER ON/OFF volume control counter clockwise.
Antennas
AM - This unit has a built-in AM radio antenna, which provides adequate reception in most areas. If reception
is weak, move the unit to improve reception.
FM - This unit has a built-in FM antenna, which provides adequate reception in most areas. If reception
is weak, move the unit to improve reception.
Auto Scan
Press and hold the Skip/TUNING or UP button for approximately 1 second and the unit will automatically
search for the next available station.
To Store a Radio Station into Memory
1. Tune a desired station as described in the previous
section. Press the PROG. button; the preset numbers
will blink.
2. Within ten seconds, select the desired preset using
the PRESET UP (14) or DOWN (15) button to set the
desired channel. Press the PROG (11) button
to confirm.
3. To tune to a preset station, simply press the PRESET
UP (14) or DOWN (15) button to select the desired
preset.
13
10
12 13
11
14
15