Filter
Top Products
Orbiter SR4000 User Guide Orbiter SR4000 User Guide
Menu Display Options
To enter the Menu Options page, press and release
the MENU Button. The “Menu Options” list will
appear on the display (below).
Using the Rotary Knob, highlight the option you wish
to adjust and press the Knob. The following options
are available:
Sirius ID Audio Level
Display Settings Antenna Aiming
FM Transmitter Options Memory Options
Add or Skip Time Based Features
Lock Options Factory Default
Activating the Song (S-Seek) Alert
1. Press and hold the MEMO button for 3 seconds to
enter the S-Seek Mode.
2. Press and Release the Rotary Knob. A pop-up screen
displaying two selectable options - “Delete” and “S-
Seek” will appear (below left).
3. Use the Rotary Knob to highlight the “S-Seek” option.
4. Press and release the Rotary Knob and a S-Seek
confirmation screen will appear. Select the “Yes”
option using the Rotary Knob and press the Knob in
to confirm (below right).
Each time the SR4000 Receiver is turned on, it
automatically searches the incoming signal to
determine if a match exists between the signal and
the currently saved information stored in receiver
memory. If one or more matches are found, a pop-up
screen momentarily appears for 2-seconds and
displays “S-Seek Alert”. An audible beep tone will
be heard indicating that a match has been found. The
display then reverts to the S-Seek Alert screen which
displays the current matches. You can now select the
Artist/Song Title that you wish to listen to. No stored
match alert is provided for the currently selected
channel. To ensure that no duplicate entries are stored
in memory, the Receiver will check the stored input
data to ensure the information about to be stored is not
already in memory.
• If one or more matches are found, a display list
appears (below), and allows you to scroll through the
list of songs using the Rotary Knob. Once a song is
found, it can be selected by pressing the Rotary
Knob, and the display will revert to either of the
selected display modes.
• If a selection is not chosen within 10 seconds after
the last action, the screen will revert to the previously
selected display and tuning mode.
NOTE: Play of the current selection will continue
until a new selection is made.
Note: If a button is not pressed within 10 seconds, the
Receiver will exit the “Menu Options” function and
reverts back to the Default screen display.
Sirius ID
Displays your 12 digit Sirius ID (SID) number. The
SID is unique to every SR4000 Receiver and is
required to activate your service. It is recommended
that you write this number in the space provided on
the last page of this user guide. No adjustments are
allowed in this mode. To exit this option, press the
Rotary Knob or Menu Button.
17
16