Filter
Top Products
Orbiter SR4000 User Guide Orbiter SR4000 User Guide
Changing the Lock/Unlock Code
The first time the Lock/Unlock function is accessed,
the user must enter the default lock code. The default
lock code is “0000”. This code can be maintained or
changed. To change the default lock code, perform the
following procedure while in the “Menu Options” List
mode:
1. Use the Rotary Knob to highlight the “Lock Options”.
Press the Rotary Knob to select.
2. Select “Edit Code” from the Lock Options Menu
(below left) and press the Rotary Knob to select.
3. Enter the default code “0000”.
4. The “New Code” prompt will appear. Enter your new
four digit code using the 0-9 number buttons (below
right). You will then be prompted to confirm the new
code by entering your code again.
5. The lock code is now changed.
Note: you can use this same method to Edit the code
once it is changed from the default.
Lock Options
The SR4000 has the ability to lockout the use of any
channel, or channels you do not want others to
access without your permission. Like the Skip
feature, the locked channel will not appear when the
user changes channels with the Rotary Knob. When
the user tries to access the locked channel using
the Direct Tuning function, the “Enter Code” screen
will be displayed and the channel will not be
accessed until the proper code is entered.
While in the “Menu Options” List mode, follow the
steps below to Lock a channel:
1. Use the Rotary Knob to highlight the “Lock
Options”. Press the Rotary Knob to select.
2. Select “Lock/Unlock” from the Lock Options Menu
(below left) and press the Rotary Knob to select.
3. Use the Rotary Knob to select the channel you wish
to lock. Press the Knob in to select (below right).
Note: you can repeat steps 2 and 3 for as many
channels you wish to Lock.
Audio Level
The audio output of the SR4000 can be adjusted to
fine-tune the audio signal level for maximum
performance. This is important when using either the
optional SH4000 Home Docking Station or the
optional SM4000 Mobile Docking Station. To change
the Audio Level, perform the following procedure
while in the “Menu Options” List mode:
1. Use the Rotary Knob to highlight the “Audio Level
Options”. Press the Rotary Knob to select.
2. Use the Rotary Knob to adjust to the desired audio
output level. A 10 segment horizontal bar graph is
displayed with a “-“ sign to the left and a “+” sign to
the right. To select and exit this function, press the
Rotary Knob. No button activity for 10 seconds will
also exit this function.
Antenna Aiming
When using the optional SH4000 Home Docking
Station or the SB4000 Boombox indoors, it is
important to locate the antenna in an acceptable
location (See the SB4000 or SH4000 installation
guides for more information).
1. Use the Rotary Knob to highlight “Antenna Aiming”.
Press the Rotary Knob to select.
2. Two 10 segment horizontal bar graphs will be
displayed ( SAT and TER) with a “-“ sign to the left
and a “+” sign to the right. SAT indicated satellite
signal and TER indicates terrestrial signal – if
available.
3. Adjust the antenna for maximum performance as per
the SB4000 and SH4000 manuals.
To exit this function, press the Rotary Knob or MENU
button,
21
20