Sirius Satellite Radio Model Satellite Satellite Radio User Manual


 
11
GUIDE TO FEATURES (REAR PANEL)
1. 12VDC/3A:
Connect the included external power supply to this input, or use an
optional 3A fused, 12VDC adapter for operation in a boat or camper. A Sirius antenna
other than the one supplied with the Model Satellite may be required for these
applications. The connector must be 5.5mm/2.1mm center positive. When discon-
necting the power supply from the wall outlet, never pull it by the cord. Do not plug
the Model Satellite into a wall outlet controlled by a switch. It is normal for the
power supply to become warm during use. For best AM/FM reception, keep the
external power supply away from the Model Satellite.
Use only the external power supply provided with the Model Satellite. To obtain
a replacement, contact your dealer or Tivoli Audio at 1.877.297.9479.
2. INTERNAL/EXTERNAL FM SWITCH:
Switch between internal and external FM
antennas. If an external antenna is used, the switch should be in the External
position. This switch has no affect on AM reception. See the section marked
AM/FM Reception.
3. EXTERNAL FM CONNECTION: In some cases, FM reception may be improved
by sliding the included external FM antenna over this “F” connector and setting
the antenna switch to External. For more, see the section marked AM/FM Reception.
4. HEADPHONE OUT
:
Connect a headset (not included) to this variable ster
eo output
for private listening. The headset will mute the primary speaker. The headset’s volume
is adjusted using the volume knob. This ster
eo output accepts a 1/8
" stereo male
mini connector
. A
void using headphones at high volume levels to pr
event possible
hearing damage.